The encoder installation considerations！

   As we all know, the rotary encoder is one of encoders, rotary encoder can be used to measure the rotation of the mechanical device ,also can cotrol the speed, sometimes the speed of the mechining needs to change a rotary encoder can be used to use , then what you need to pay attention to install the encoder.

    Mounting the rotary encoder can be divided into two areas, a factor is taken into account electrical aspects, to the assembly when the cable shield wires.
   When the first installation to be optimistic about the rotary encoder manual carefully checked the equipment, check the product specification model, in particular the size of the interface and wiring products, respectively.
   Second, if the long-distance transmission, the signal will be considered as the reason for the length of the distance varies, and this time should choose a low impedance, and has a strong anti-jamming capability models. Again, with the electrical aspects of the encoder can not be used where strong electromagnetic waves.
   Of course, also pay attention to the environment, because the encoder is a precision instrument at the time of installation to be noted that the environment can meet the basic requirements, pay attention to whether there is interference factors in the environment, such as vibration source, so as not to interfere with the coding the work, but also pay attention to protecting the encoder machines do not come into contact with water or liquid ambient condition under certain conditions to increase protective cover, the encoder used, the environmental temperature and humidity are to be considered.
    Finally, at the time of installation, but also pay attention to the mechanical aspects of the content, can withstand the maximum axle load limits are a very important part, at the same time, the number of axes is at an angle of more basic problem, and the axis of the shaft are suitable within the range. The encoder is part of electronic machinery, so when the installation be careful not to fall or struck with a hard object on the ground, another before installing it to check whether the machine screws tightened again when the work can proceed smoothly.

Previous：What is the encoder and the accuracy of measurement?
Next：38mm Rotary Encoder Incremental Encoder Roundss displacement measuring encoder