Servo motor encoder uses the notes is！

Installation
Do not direct impact is applied to the shaft during installation.

Connect the servo motor encoder shaft to the machine, use a flexible connector. When the shaft mounted connector, not pushed hard. Even with the connector, due to poor installation, it is possible to add than the allowable axle load bigger load, or cause dial core and, therefore, pay special attention to.

Bearing life use conditions, the affected load bearing particularly large. The bearing load smaller than a predetermined load, can greatly extend bearing life.

Do not disassemble the encoder, to do so would undermine the anti-oil and anti-drip properties. Drip-proof product is not long-term immersion in water, oil, surface water, oil should be wiped clean.

Previous：Roundss cable displacement sensor Digital output draw wire encoder IP54 incremental taype draw wire
Next：Electronic ruler Incremental linear scale Optical ruler linear scale encoder