The output of the incremental encoder

Way of incremental encoder output the output of the output voltage, the collector output, complementary output (push-pull output), line driver output. Within close control encoder series OVW2 for example is commonly used in simple introduce the output of the encoder mode and internal circuit form.

Output OVW2 series: voltage output, NPN open collector output, PNP open collector output, push-pull push-pull output, line driver output.

Voltage output:

In OVW2 series 2 represents the output signal is A, B two phase, 2 m encoder with the origin signal that A and B, Z three-phase. 2/2 m is DC4.5 ~ 13.2 V power supply voltage range.

NPN open collector output:

2 c / 2 hc in OVW2 series represents the output signal is A, B two phase, 2 MC / 2 MHC said encoder with the origin signal that A, B and Z three-phase. 2 c / 2 MC is DC4.5 ~ 13.2 V power supply voltage range, 2 hc / 2 MHC is DC10.8 ~ 26.4 V power supply voltage range.

PNP open collector output:

In OVW2 series 2 HCP represents the output signal is A, B two phase, 2 MHCP said encoder with the origin signal that A, B and Z three phase. Is the scope of HCP / 2 MHCP power supply voltage DC10.8 ~ 26.4 V.

Push pull (push-pull output:

2 ht in OVW2 series represents the output signal is A, B two phase, 2 with MHT said encoder namely A, B and Z three-phase origin signal. Ht / 2 MHT is DC10.8 ~ 26.4 V power supply voltage range.

Line driver output:

In the OVW2 series 2 md represents the output signal is A, B, Z, A -, B -, Z - six phase. Power supply voltage range is 2 md DC4.75 ~ 5.25 V.