Rope displacement sensor advantages！

Rope displacement sensor advantages:

Rope displacement sensor is a linear displacement sensor integrated in the structure of compact, fully integrated angular displacement sensors, linear position sensors and various advantages gear, strip transmission. Workmanship, materials research: a sensor housing with a hard aluminum alloy and anodized, to achieve effective rust stain effect; fixing screws are used in the selection of high hardness alloy material, making the sensor more robust and reliable. Sensor cable connectors with high-grade waterproof aviation joint; stretching rope wrapped Teflon surface using cable material, to further improve the accuracy of the test sensor and the sensor to a longer service life. A structure is compact, versatile, easy to install and the small size of the installation space, without compensation gap. Having a high-precision measurement, high measurement repeatability and high positioning accuracy, long stroke and long-life sensors. It can be used to accurately measure and positioning control, with display instrument to be used as the measuring instrument manual measurement. This series is suitable for a variety of environments, its small size and excellent performance under harsh conditions, accurate and flexible installation and simple attracted widespread attention. It has a lot of options. Fourth, the cable displacement sensor is installed Note:

1. Use the bottom four fixed screw holes, according to on-site facilities and machine installation space required, installation or additional direct protection or other mechanical use.

2. When stainless steel cable installation, horizontal angle should be noted, that as far as possible so that a rope mechanism to move the site to the mouth of the outlet slide to the level of work,

Maintain a minimum angle (tolerance +/- 30) to ensure measurement accuracy and life of the cable.

3. Rope body is stainless steel and coated with fluorocarbon layer, do not let things improper cuts by external impact, etc. ﹑ ﹑ burning occur: an excess of dust or debris, stowage enough to destroy the ropes reserving items inside the pulley or outlet port will cause cable damage, resulting in uneven operation failure.

4. Not mounted on the fixed table or sit in front, do not touch it or pull rope and other products will be allowed to own instant rebound. This will cause cable breakage, damage the body structure and personal safety.

5. Instant JF-407L and JF-810L series reciprocating motion acceleration must not exceed 1 m / sec; instant JF-810L and JF-1180L series reciprocating motion acceleration must not exceed 0.5 m / sec; this will cause cable fault, I am afraid the company does not assume responsibility outside this range.

6. If you are using a non-linear motion mechanism, please install the appropriate pulley running.

Previous：Rope sensor working principle and common parameters:
Next：Rotary encoder and resolver