THEORY OF ENCODER OPERATION - Changchun Rongde Optics Co.,Ltd.

Roundss News

Changchun Rongde Optics
Co.,Ltd.
Add：No.1666 Yaan Road,
North Lake Development District,
Changchun 130102,China
Tel：86-431-81881745
Fax：86-0431-85256892
E-mail：rongdecui@roundss.net
Skype：adacui_roundss

Company News

Current position ：Home > News > Photoelectric Sense

THEORY OF ENCODER OPERATION ！

Changchun Rongde Optics Co.,Ltd. Release time：2016/7/25 Browse：704

The principle of incremental encoder operation is generation of a symmetric, repeating waveform that can be used to monitor the input motion. The basic components of all optical encoder incremental encoders are the light source, light shutter system, light sensor, and signal conditioning electronics encoder. These components will be housed and assembled to various mechanical assemblies, either rotary or linear in design depending on how motion will be monitored. The encoders mechanical input operates the light shutter which modulates the intensity of the light at the sensor. The sensors electrical output is a function of the incident light. The encoders electrical output is produced from the sensor output by the signal conditioning electronics and can be either
• a sinewave
• a shaped, squarewave ecoder

a series of equally spaced pulses produced at regular points on the waveform

In its most fundamental form, the light shutter is an optical slit and a substrate inscribed with alternating lines and spaces of equal width. When the substrate is moved relative to the slit, the light transmitted through the slit rises and falls. This incident light relatively excites the light sensor which in turn provides the raw electrical signal to shaping electronics. In practice, a large multi-slit stationary substrate or reticle, is used instead of a single slit (see Figure 4-1). The reticle allows transmission of more light whch aids the alignment process,Also,line imperfections such as pinholes,scratches,and dust particles do not significantly affect sensor output since incident light is averaged over many lines.nificantly affect sensor output since incident light is averaged over many lines.

The encoders mechanical input is coupled to the moving plate to operate the light shutter. For the position shown in Figure 4-1, the light sensor will indicate maximum fight intensity

Previous：CNC Spindle Encoder Incremental Motor Rotary Encoder
Next：ncremental Optical Magnetic Spindle bearless Hollow shaft STS 256T big hollow shaft

[Return to the previous page]