Install an Encoder！

After selecting the appropriate motor, it is important to know how to properly install encoder. The installation of each encoder is dependent upon its mounting or base option. If an encoder is to be mounted to a motor shaft, then a centering tool can be used to align the hole of the encoder to the shaft. The different mounting options have varying functionalities. An R-option allows for a +/- 15 degree play of motion in which the encoder can rotate back and forth. A T-Option however, uses adhesive to stick to the back of a motor.

For step by step instructions on installing an Anaheim Automation encoder, watch our video tutorials here. Anaheim Automation also provides the option of an encoder adder, where we mount the encoder for you, hassle free!

An encoder is a sensor of mechanical motion that generates digital signals in response to motion. As an electro-mechanical device, an encoder is able to provide motion control system users with information concerning position, velocity and direction. There are two different types of encoders: linear and rotary. A linear encoder responds to motion encoder along a path, while a rotary encoder responds to rotational motion. An encoder is generally categorized by the means of its output. An incremental encoder generates a train of pulses which can be used to determine position and speed. An absolute encoder generates unique bit configurations to track positions directly.

Previous：Incremental 5000ppr rotary optical Through Hollow shaft encoder speed controller
Next：Small 6mm Shaft Diameter Automation Industrial 4096 Multi-turn Rotary Absolute Encoder