How to mount MPG knobs for selector switches ！

1. All switches select OFF circuits (position no.1)
when fully turned counterclockwise. 1 click/2
clicks clockwise will make a connection of
position no.2/no.3 with COM which feeds a
signal for each

2. If the indications on the plate begin with
“OFF”, “0” or any other indication to render
disconnection, confirm that the shaft is
turned fully counterclockwise to the end,
then screw the knob on to it within 5kgf.cm
of torque.
 If the indications begin with “X”, “x1” or any
other indication to render connection, 1) turn 1
click clockwise from the very left end, 2) adjust
the white line on the knob with the indication,
then 3) tighten the screw of the knob (cf.
picture 2. multiplier switch).
3. The standard wiring diagrams indicated do not
necessarily be consistent with the actual
delivered products. Confirm the diagrams on
the specifications when mounting the knobs.
4. When the knob is turned, it will stop switch where
stopper-pin is inserted. To alter the position to
stop, refer to picture 3 and 4, then re-insert the
pin into the designated positio

Previous：Roundss digital readout in electronic data system 2 axis DRO display speed
Next：Roundss CNC machine measuring digital sensor linear glass scale