The parameter of draw wire sensor！

Commonly used parameters are measured stroke, output signal mode, linearity, repeatability, resolution, wire size, outlet tension, maximum return speed, weight, input resistance, power, operating voltage, operating temperature, vibration, The Signal output mode
    The output signal of the rope displacement sensor is divided into digital signal output and analog signal output. The digital output type can select the incremental rotary encoder, absolute encoder and so on. The output signal is square wave ABZ signal, cosine and cosine signal, CANopen encoder signal, Free RS485 signal, MODBUS signal, Profibus signal or Gray code / binary signal, measuring stroke length (100 ~ 15000mm), high precision (~% FS), protection class IP65 encoder. Both the housing and the pulleys are treated with corrosion, and the traction rope is a 316 stainless steel rope that works in harsh environments (including seawater). Optional output methods are: resistance type, voltage type, current type, incremental pulse type, absolute pulse type.

    Analog output can choose precision potentiometer, Hall encoder, absolute encoder, the output signal can be 4-20 mA, 0-5 volts, 0-10 volts and resistance signals, the maximum stroke can reach 12500 mm , The use of the environment can reach the maximum IP65 protection level, -45 ℃ ~ +105 ℃ wide temperature environment.

Previous：Digital display incremental encoders DC5V 2000ppr speed sensor
Next：58mm magnetic absolute encoders SSI interface DC5V