Roundss News
- Changchun Rongde Optics
- Co.,Ltd.
- Add：No.1666 Yaan Road,
- North Lake Development District,
- Changchun 130102,China
- Tel：86-431-81881745
- Fax：86-0431-85256892
- E-mail：rongdecui@roundss.net
- Skype：adacui_roundss
Company News
Current position ：Home > News > Photoelectric Sense
Handwheel common faults and troubleshooting methods！
Changchun Rongde Optics Co.,Ltd. Release time：2017/3/6 Browse：988 Handwheel common faults and troubleshooting methods1, with the hand wheel of each axis jitter phenomenon. The original circuit board for the hand wheel box has a problem, replace the damaged components
2, hand wheel sometimes easy to use sometimes not easy to use, there is no law, the original hand wheel or hand wheel extension line of the resistance is too large,
Lansheng CNC machine tools supermarket monopoly replacement spare line problem solving
3, hand wheel reaction is not sensitive, there is a serious phenomenon of pulse generator loss, the original plug is not connected to the pin in place
4, hand wheel can not be used, the original signal line for the small plug A / B that X1 / X2 inserted
5, hand wheel can not be used or hand wheel pulsed loss phenomenon, the original cable splitter jump needle is wrong, should jump on both sides to stay in the middle, cable splitter DIP - FIX switch (S1 - S6) set as follows
6, hand wheel can not be used or hand wheel pulse loss phenomenon, the signal cable 6FX2002-4AA21-0xx0, there is disconnection or virtual connection
7, hand wheel can not be used, the original pulse generator is broken, can only be replaced
Previous：ROUNDSS CNC Machine hand controller handwheel encoder RHC80.1 Next：100mm outer diameter rotary encoders 25mm bore speed sensor
Products