What parts of the photoelectric encoder are made up of?！

In actual use, you need to have a simple understanding of how the device works. How is the device connected during operation? As mentioned above, its use is based on special optoelectronics. When the signals are mutually completed, the device is generally rotated in a coaxial manner during installation, which can help the device achieve the same speed.

When the motor of the device rotates, the internal grating plate and the motor of the device rotate at the same speed, and the corresponding detection device and signal conversion can be completed through the LED and the electronic component, so that the device can be accurately used when used. The signal is output, and the phase difference is well provided to ensure the stability of the operation of the device.

Encoder is an important auxiliary device. In the process of actual use, it can rely on its own internal mechanism and principle to help the device calculate the corresponding demand data, carry out the necessary data conversion, what is the photoelectric encoder? Simply put That is, the mechanical geometric position of the output shaft inside the device is converted into a special digital quantity and a pulse signal, which is simply calculated by internal signal calculation to complete the actual measurement demand.

The composition of the photoelectric encoder: different from the general equipment, the photoelectric encoder does not adopt a modular design, but a special mechanical conversion is carried out. The inside of the device is mainly composed of a grating disk and corresponding detecting devices, each of which is composed. It will have its own characteristics, the uniform layout adopted in the equipment design scheme of the process opening, the testing and connection of the signal through several rectangles, and the special signal conversion system inside the detection device.

It is precisely because of the mutual conversion between the photoelectric signals that the device performance conversion can be better accomplished, because the actual signal can directly reflect the corresponding signal through the corresponding pulse number, and the test is more convenient and free from any Factor interference.

Previous：What is a direct drive encoder?
Next：Resolution considerations when purchasing incremental encoders