Safe operation of rotary encoder！

safe operation of rotary encoder
       

The rotary encoder is used to measure rotational speed and with PWM technology can achieve fast speed device, optical rotary encoders by photoelectric conversion, can convert the output shaft angular displacement, angular velocity and other mechanical quantity into corresponding electrical pulses to digital output.

The main function of the rotary encoder is used to monitor the transmission of rotating or moving parts, the rotary encoder includes a sensor designed to take full account of the security elements. This product is designed to bring a great deal of efficiency of our work, the use of the rotary encoder for the user to improve the processing efficiency at work.

In their daily work, the rotary encoder is directly related to whether the rules of production safety, the safe operation of the rotary encoder to pay attention to procedures which:

1. Check whether the rotary encoder door seal. Work five minutes shall start ventilation and dust removal equipment, ventilation and dust removal equipment failure when, prohibit rotary encoders work.

2, former staff must wear protective equipment, are not allowed to bare arm operating rotary encoder.

3, the rotary encoder should meet the requirements of the work, usually between ten to twenty numbers apply.

4, rotary encoders work, not to prohibit close. When the cleaning operation and adjustment of parts, should be shut down.

5, not allowed to use compressed air rotary encoder body dust.

6, after work, rotary encoders ventilation and dust removal equipment should continue to run for five minutes and then off to discharge indoor dust, keep the area clean.

 Therefore, we should pay attention to these operating safety regulations, and also improve productivity and guarantee security

Previous：How to Install an Encoder
Next：Common failure of rotary encoder